Print

[zeuce]

the holes in the manifold dont line up with the holes in the cyl head properly (from the factory) so its best to enlarge them. aka port match for better flow.

[Hood Star]

Yeah this would work but it`s like taking a step down I`d have to port it and add a second 02 sensor location. I can just gut my own I guess. Sorry mang.

[zeuce]

no prob at all dude! def work with whats in the truck its super easy to gut out.

[zeuce]

BUMP! selling stock wheels

[zeuce]

BUMP the drop springs and blocks are now 75 bux!

[kaelshort]

id liek the springs but i tihnk id be to low! trying to find some zq8 stuff

[zeuce]

but i tihnk id be to low!

  TOO LOW is there such a thing?   LOL

[kaelshort]

haha in canada there sure is

[kaelshort]

hey chris u wanna swap ur drop for that monitor or mine? get me some 2" blocks to make the deal sweeter

[zeuce]

its 2" drop springs and 3" Blocks. do you still have the air bag kit? might be interested in that

[kaelshort]

i sure do, i know its a 3 block but im saying u should get a 2 block and then trade me

[kaelshort]

come on u know u wanna!

[zeuce]

yep

[zeuce]

yep

Are they easy to install? is there any thing else iw ill need to buy to lower my truck? Also how much for shipping to L3X 1S9

you need a spring compressor to install the drop springs in the front and then you need to remove the ubolts on the rear axle and install the blocks in the rear. the only thing missing from the kit is the longer u bolts for the rear. if you have a spring and axle shop in your town they can make you a set (3 inchs longer than stock). also budget for a wheel alignment. I will check on monday for the shipping. I have a DHL account through my work so it will be cheaper to ship than canada post

[zeuce]

that depends on how big a tire and wheel combo you go. here is a pic of my old colorado that the kit was on. I had 18's with 235/50r18 with no rub issues at all. as you can see there is still plenty of room. I could have easily ran 20's but I needed some tire, our roads suck LOL